36 DIY Patio Ideas to Transform Your Backyard

36 DIY Patio Ideas to Transform Your Backyard Speaking of, take a peek at our favorite front door awning ideas, too. Once you’ve selected your design and set your foundation, you can begin to place your pavers. Discovery family, is the premier home lifestyle and entertainment brand on cable TV, in streaming on discovery+ and Max, in stores, and online here at HGTV.com. We offer home design, garden and how-to ideas, inspiration and advice based on our brand’s 30 years of expertise and experience. Learn more about us, our editorial standards and our gardening experts.

Patio Design Ideas

The simple running bond pattern we’ve chosen looks good with the stone border and is easy to lay. Straightedge to check areas on both sides of the string. Take a well-deserved break when you’re done digging.

They can mimic patterns like brick, slate, and stone in concrete.Read on for seven fun ways to add some shade to your patio.On this job we used the sand layer because the patio was covered by an enclosed porch above, and because it made it much easier to fit the stones in place.After curing, remove the form boards carefully so as not to chip the concrete.

To screed the sand for leveling, start at one end and place the screed (or 2×4’) on top of the pipes. If it isn’t, which is likely, use the tamper tool/ plate compactor to tamp down the soil. These extra leveling strings will help considerably when you are leveling the inner portion of the patio space. At this point, you should add additional stakes through the middle of the patio. Work front to back and left to right, then tie strings where the other strings meet.

Choose Alternative Furniture Materials

To build your DIY patio, you'll need a gravel or limestone paver base, sand, and your choice of patio material. Bricks, pavers, or flagstones can all create sturdy and attractive stone patio designs. After compacting the gravel base, it’s time to add a 1-inch layer of sand. This sand serves as a bed for your pavers and helps them stay level. Decide on the highest point of your patio and raise the form to that level. Drive a deck screw through the stake and into the form to lock it in position. Use a 48-inch level or a laser level to ensure that the entire perimeter of the form is level. Double-check that the top edges of the form boards are level with each other. Use a trowel to level http://usainformed.com/directory/listingdisplay.aspx?lid=7479 the sand in the nooks and crannies around the perimeter. When you run the compactor over the bricks to seat them in a later step, they’ll settle down flush with the stone.